Description
The new FIBARO Smart Module(FGS-214) is a smart Z-Wave wireless module that can control a maximum load of 6.5A in one channel.
- Control the ON-OFF function of one circuit or appliance remotely or using a wall switch
- Can be used as voltage-free relays (dry contacts)
- Compatible with all Z-Wave networks
- Acts as a repeater expanding your Z-Wave network
- Wide range of compatibility with existing light fittings and does NOT require expensive cabling
- Latest generation Z-Wave 500 series chip
- Z-Wave Plus certification
- Very accurate energy measurement +/- 1 % for power above 5W
- Supports secure mode (Z-Wave Network Security) encrypted with AES-128
- Dry contacts – this is important. It means that the new FGS-214 can be used to control low voltage systems such as garden lights and irrigation, or where you want a pure volt-free switch such as alarm panels and garage door controls.
RF Protocol | Z‐Wave |
RF Frequency | 921.42Mhz ‐ AU/NZ approved RF for Z‐wave |
Z‐Wave device type | Z-Wave Switch, Routing Slave |
Power | 230V ± 10% 50/60 Hz |
Operation Range | Up to 20 m indoors with no obstacles |
Application | Indoor use only, up to 6.5A load |
Operation temperature | 0 ~ 55 °C |
Storage temperature | ‐10 ~ 80 °C |
Weight | 50g |
Housing | ABS |
Compliance | EN 55015, EN 60669-2-1 |
Regulatory Compliance Mark |
N5496 |
Dimensions |
(LxWxH) 42mm x 37mm x 17mm |
Reviews
There are no reviews yet.